Port SERVICEACCESS - SERVICE-PASSIVE

Port for passive support of Ethernet services

Stimulation

此端口不具备激励能力。

Name

在以下情况下可用

默认值

有效值

Type

Description

物理层 ❲网络访问❳

Port

string

Name of the port inside a network. In Vector Hardware Config, the network-based mode must be activated.

Automatic data reception on test run

☑

bool

Only operative if on the left for ‘Start’ either ‘Always’ is chosen, or ‘If necessary’ and the port is in use in the test configuration.

VLAN Settings ❲IEEE 802.1Q❳

IPC is disabled

VLAN mode

IPC is disabled

auto

[auto, disable, single tagging]

string

如果应使用数据库中的 VLAN ID,则设为 ‘auto’;如果不应使用 VLAN,则设为 ‘disable’;如果应指定固定的 VLAN ID,则设为 ‘single tagging’

VLAN id

IPC is disabled » VLAN mode: ‘single tagging’

0

int

如果传入的数据包带有 VLAN 标签,则会对其进行过滤,只有带有该 VLAN ID 的数据包才能通过。不带任何 VLAN 标签的传入数据包也会通过过滤器。

SOME/IP Settings

IPC is disabled

SD Multicast IP

IPC is disabled

‘auto’

string

Multicast IP address to be used for Service Discovery. Set it to ‘auto’ if the value from the database should be used

SD Port

IPC is disabled

‘auto’

string

UDP port to be used for Service Discovery. Set it to ‘auto’ if the value from the database should be used.

Behavior in case of protocol errors

IPC is disabled

‘NotPresent’

[‘ERROR’, ‘NotPresent’]

string

Behavior of the test step when a protocol error occurs (e.g. the control unit does not respond). By default ‘NotPresent’ is returned. Alternatively, the test step can be evaluated with ‘ERROR’.

LearnBPFilter

Learns the endpoints (source IP address and port) of all needed services. Endpoints that are encountered within the specified timeout, but are not needed, will be transformed into a negative Berkeley Packet Filter which drops corresponding network packets. This filter will be used for reception in the test case as well as for pcap(ng) recording via this port. The negative filter may be extended by a user-defined part using BPF syntax. If the recording is already running, the learned filter has no influence on it.

注意:该作业已不再需要,因此不再受支持。

Parameterization

Parameter

Name

在以下情况下可用

默认值

有效值

Type

Description

clearCache

False

[False, True]

bool

Resets the cache of a previous call. The endpoints which exist in the network will therefore be learned anew. But the call will take longer in this case.

timeout

5

float

Time in seconds (float) until learning will be stopped

userBpf

string

Optional extension of the negative filter. Please provide positive in BPF syntax what should also be discarded by the filter, e.g. ‘vlan 42’

返回值

Name

在以下情况下可用

默认值

有效值

Type

Description

result

object

Dictionary containing neededEndpoints, otherEndpoints (for the negative filter), bpf (the resulting filter Expression), bpfLearn (filter expression temporarily used while learning)

StartReceiving

Manually starts the reception of network packets